Video University: Video University Forums: Audio For Video: iRiver setting for ambiant


Home	Free Library	Store
Free Catalog

Save with a Two Year Membership

To post in the forums see the Forum Guidelines.
Join or Renew Today.
New Benefits for all VU Members

Forum Guidelines and FAQ
Main Index	Search Posts
Who's Online	Log In

Home: Video University Forums: Audio For Video:
iRiver setting for ambiant - for tomorrow

Scott Brooks
Veteran

Nov 30, 2007, 12:57 PM

Post #1 of 5 (1843 views)
Shortcut

iRiver setting for ambiant - for tomorrow	Can't Post

I hope someone can answer this before the end of the day.

Tomorrow I'm doing a reception with a live band ... somewhat uncommon around here. I do not have any desire to attempt to take a feed. All I want to do is set my iRiver (890) with a Giant Squid mic in the back of the room and let it record. I realize it will depend on the size of the room, but is there a "general" level that should be somewhat safe?

I think I've got mine set at 47 for voice. ... just wondered if I needed to be at 25 to 28 maybe?

I haven't used my iRiver in over a year, so I spent most of last night looking over everything again to try and get reacquainted.

Thanks ~

Mark Foley
Veteran

Nov 30, 2007, 4:27 PM

Post #2 of 5 (1834 views)
Shortcut

Re: [Sparky] iRiver setting for ambiant - for tomorrow [In reply to]	Can't Post

I would leave it as is..since it will be so far from the sound source. If you drop the record level much further, you risk losing much information (fall below the noise floor of the unit)
_________________________
Mark

Scott Brooks
Veteran

Nov 30, 2007, 7:40 PM

Post #3 of 5 (1826 views)
Shortcut

Re: [Mark Foley] iRiver setting for ambiant - for tomorrow [In reply to]	Can't Post

Thanks Mark. I've found for my needs in these types of situations the vx2000 usually gets what I want, so the iRiver is just a bit of a backup.

Mark Foley
Veteran

Dec 1, 2007, 8:52 AM

Post #4 of 5 (1801 views)
Shortcut

Re: [Sparky] iRiver setting for ambiant - for tomorrow [In reply to]	Can't Post

I wouldn't get my hopes up for much of a capture with this process...however, it could be used as background layers for the main audio. Probably will have to add heavy low-end EQ in post to break from the hollow sound you'll probably get...good luck
_________________________
Mark

Coleman
Veteran

Dec 25, 2007, 7:56 PM

Post #5 of 5 (1658 views)
Shortcut

Re: [Sparky] iRiver setting for ambiant - for tomorrow [In reply to]	Can't Post

Way late for advice hope all went well but here are my thoughts anyway. For reception with live bands I always try and get a live feed because many times they do the toasts through the same sound system and it works well for that. Rusty has a way to put a mic directly in front of a speaker with an iriver. Search Rusty mic iriver and you will find his suggestions.

Coleman