X-Andrew_Reitsma
Imported Account
Jul 10, 2001, 7:10 AM
Post #1 of 2
(1111 views)
Shortcut
|
|
Home made Tally lamp
|
Can't Post
|
|
Gday,
we have 2 XL1's, & a Videonics MXPRO video mixer which
we use to video our church services and other meetings.
The cameras have a tally lamp which operates(if desired) when the
camera is recording onto it's own DV tape.
We record the feed from the cameras onto a separate tape as a master
so the cameras are not using their own recording gear. This means the
tally light is off.
I'm wanting to make some form of light, attached to the cameras,
controlled by the director, that indicates to the camera operator that their
camera is "on air", rather than saying "you're on - you're off" via the headsets all the
time.
I'm guessing some sort of switch arrangement at the vision mixer that
can be activated by the director when he (I) switches cameras.
Any ideas at all??
Thanks,
be blessed & be a blessing.
Andrew Reitsma
Full Life Production Ministry
Full Life Christian Fellowship
www.fulllifecf.org
|
