RatVega
Enthusiast
May 26, 2006, 2:30 PM
Post #2 of 3
(554 views)
Shortcut
|
|
Re: [mattjay] I updated our G4 mac from 10.2 to 10.39 and we lost deck control on Final cut 3
[In reply to]
|
Can't Post
|
|
I don't recall anything basic to this upgrade that affect deck control.
Do you recognize other FW devices on the same FW port?
Do this:
Power up the attached deck and open the Apple System Profiler and look at the FireWire ports. If you see the deck (understand that full descriptors are rare, mine just shows up as a JVC something) then the problem is with FCP. If the device doesn't show up in ASP then the problem is more likely cabling or the device.
Post back with more detail on your environment and what you find in ASP.
______________________________________________________________
Currently on a loaded 2.5GHz G5 dualie/5GB/1TB internal RAID/dual 19" monitors. Final Cut Studio, Adobe Suite, Boris RED. Shooting with Canon.
VU California Crew, Inland Empire Sub-Chapter (paragraph?)
|
