Ken B
Novice
Mar 16, 2008, 3:56 PM
Post #1 of 1
(2541 views)
Shortcut
|
|
Sony PD170 : incoming Audio cancels itself out !!!
|
Can't Post
|
|
Was adjusting the audio levels up when all of a sudden NO audio... dead air... total silence in my headphones !!!
Then noticed that channel 1 and channel 2 were set at the exact same level.
As soon as I changed the level of channel 1 or channel 2 audio would come back but as soon as I set them at the same level again - POOF ! .... no audio.
Also on playback whenever the levels same no audio in headphones.
That is SCARY. I'm thankful to a Mentor who kept pounding into my brain the importance of using headphones !
Anyway here's the camera settings :
The slide button in the Record Channel Select is on Ch1 Ch2.
The audio settings in the menu :
Audio Mode : FS48K
Mic NR : ON
Audio Set : AGC Ch1: OFF AGC Ch2OFF
Man Gain : SEPARATE
Other info that may more may be helpful :
Heads have been cleaned periodically.
Current Hours Meter Read :
OPERATION
151 x10H
DRUM RUN
80 x10H
TAPE RUN
51 x10H
THREADING
229 x10H
Any theories ?
Thanks,
Ken
Blue Ice Video
"Bite off more than you can chew and chew as fast as you can"
Crocodile Dundee paraphrase
|
