Standard Features On JonyJib Cranes

• all aluminum heavy duty construction
• powder coat cobalt black finish
• simple 'bolt together' design
• includes mounting hardware
• uses standard steel plate weights
• foam padding for bump protection
• multiple fulcrum points
• parallelogram keeps camera level
• nylon locking nuts

JonyJib 2: Item #136A

The all new JonyJib2 Modular Camera Crane is a culmination of suggestions and improvements made to the original JonyJib Jr and JonyJib 12-18' jibs. You'll be pleased with its design and simplicity, and the low price.

The JonyJib 2 comes in four sizes: 9, 12, 15 & 18 foot versions. It can also be fitted with optional accessories like the MotorHead 20 or 30 motorized pan & tilt unit, a motorized focus and zoom unit for broadcast lenses, a ZR1000 LANC zoom & focus unit and an LCD monitor -- all neatly connected via an optional wiring kit, power distribution box and an Anton Bauer Gold mounting plate.

What sets this crane apart from others is its ability to telescope and nest within itself. This crane’s modularity is built on its lightweight, octagonal, aluminum, black powder coated 4 foot extension sections which start at the tail of the jib, with the largest diameter, and progressively get smaller as you get closer to the camera. The best part is, the arm breaks down to fit into an optional 48” tripod bag or case. The pivot, camera platform, rear control center and miscellaneous items fit into an optional Pelican 1650 carrying case.

The JonyJib2 is expandable from 9’ (2 sections) to 18’ (5 sections) in 3’ increments. Each extension tube is 4’ long giving a 1’ overlap between sections. Since each section slides out, pulled from the previous sections, you may store unused sections in the tail as ballast weight. This lightens your counterweight demand. You can buy as few or as many sections as you need, then purchase more sections when you need them.

The pivot point is pre-drilled to mount the Anton Bauer Gold Mount plate kit that feeds a 12 volt power distribution box at the tail. The distribution box feeds 12 volt power to the motorized pan & tilt head, the monitor and the camera. The pivot point is also pre-drilled to mount an optional monitor platform for 8-9” CRT style monitors. The adjustable camera platform leveling tether is also anchored at the pivot point.

The camera platform is designed to over-sling or under-sling the motorized pan & tilt head without any changes. Just attach it ‘either way’ and there’s 360 degree pan & tilt clearance.

The main arm and extension sections are aluminum while the pivot point, camera platform and rear control center are steel. They're all powder coated with a cobalt black finish.

When it's time to go higher than 18', upgrade to the JonyJib Pro. Just beef up the pivot for the extra weight and add up to 4 more 3 foot extensions to reach up to 30 feet.

Specifications of the JonyJib 2

JonyJib 2, 15 foot: Item#136B

All the features of the JonyJib2, expanded to a handy height. JonyJib Extension kits add 3 feet to expandable JonyJibs. Expand your JonyJib2 to 15 feet by adding 2 extension kits, just $800 more for a full 15-foot jib. All jib heights are measured from the ground to the overslung lens height based on a 5-foot pivot point.

Your base system includes 100mm Mounting Hub and the Rear Control Center. Check out the extensive list of accessories, including monitors, pan-tilt-zoom camera controls, supports, cables, power distribution boxes, and cases.

Need a different height? Call and ask for as many JonyJib extension kits as you need! This modular system saves you money. You can even upgrade your JonyJib 2 to a JonyJib PRO, with a height expandable to a full 30 feet.

JonyJib Carry Cases: Item 136D

Order a set of carrying cases custom made for your JonyJib configuration! Handy sizes hold all components safely and securely, including jib mast sections, motorhead and its tilt, pan, zoom and focus equipment.

		Custom Carrying/Shipping Cases JonyJib2 JonyJib2 Bag: Holds all mast sections JonyJib Component Case: Holds all other jib components MotorHead Component Case: Holds all pan, tilt, zoom and focus components JonyJib Pro JonyJib Pro Bag: Holds all mast sections JonyJib Component Case: Holds all other Jib components MotorHead Component Case: Holds all pan, tilt, zoom, and focus components
JonyJib Optional Accessories Click here to see a complete list of accessories and prices. The following items can be added to the JonyJibs, as indicated, to enhance the operation and ease of control of your camera as well as the jib:
CRT style Monitor mount This unit supports 5", 8" or 9" style CRT broadcast monitors up to 15 lbs. Jib Mount, 5/8" pin/knuckle, platform and dual nylon straps with buckles included.   Bescor MP101 This small pan & tilt controller is great for cameras weighing less than 7 lbs. like the Canon XL-1 or the Sony PD-150 or the Panasonic DVX100. It pans left and right 90 degrees and 15 degrees up and down tilt. Includes push button style joystick controller with 6' cable.   Bescor RE20 This extends the control cable 20 more feet and fits the Bescor MP101 to the JonyJibs.   Delvcam 56 Pro This adds a monitor to your rig. This 5.6" full color 12 volt LCD monitor comes equipped with BNC loop-through connectors. It also has an audio input.   Canon ZR1000 Zoom & Focus Control This LANC controller will add remote zoom and focus capabilities to your LANC capable Canon or Sony camera. It also provides start/stop recording and other features.   LANC Extension Cable 20' This LANC Extension Cable extends the ZR1000 to reach any length jib up to 18' .   Click here for more information MotorHead Motorized Pan & Tilt Units The MotorHead 20 & 30 Head pans and tilts your film or video camera smoothly and accurately by proportional joystick control. Use on your JonyJib, a remote mount, or on a tripod. This unit uses standard 12 volt DC power via a 4pin XLR connection, so it may be powered from your 12 volt battery system or with the provided 12 volt transformer.  Proportionally controlled speed of movement from top quality joystick mounted directly in the control unit. Unit come standard with 20 foot control cable. Easily mounts to your JonyJib.     Click here for more information ZR2000Z Zoom & Focus Control The Zoom & Focus controller connects to your professional Canon or Fuji ENG style lens and provides lens control from the rear of your JonyJib. The new high torque stepper motors drive full range of focus. Unit come standard with a 20 foot control cable. Easily mounts to your JonyJib.       MotorHead Carrying Case This Pelican 1600 has custom foams cut to gently carry your MotorHead 20 Pan & Tilt Head and your ZR2000Z Zoom & Focus controls.